Product Details:
Payment & Shipping Terms:
|
| Name: | Car Parking Heater | Color: | Gray |
|---|---|---|---|
| Material: | Steel | Thermal Power: | Max 9.1kw |
| Copy: | Eberspacher Diesel Heater | Fuel Consumption: | About 0.25~1.0 L/h |
12 Volt Truck Liquid Diesel Engine Heater Similar To Eberspacher Diesel Heater
CE Certiticated
2 Years Warranty
Car Parking Heater Main Technical Specifications
| Heating Medium | Coolant | |||
| Thermal power | Max | 9.1KW | ||
| Regulating range | 2.0~7.6kW | 1.8~7.6kW | ||
| Fuel | Gasoline | Diesel | ||
| Fuel consumption | Max | 1.1 l/h | ||
| Regulating range | 0.25~1.0 l/h | 0.19~0.9 l/h | ||
|
Power supply (Common battery for the engine) |
DC12V | DC12/24V | ||
| Power consumption | Max | 90W | ||
| Regulating range | 37~83W | |||
| Working pressure | 2.0bar | |||
| temperature range | Control unit | Operation | -40~75°c | |
| Storage | -40~85°c | |||
| Fuel pump | Operation | -40~20°c | ||
| Storage | -40~85°c | |||
| Water pump circulation(0.15bar) | 1650 l/h | |||
| Net Weight (Only heater) | 4.8kg | |||
| Mobile phone control(Optional) | No limitation | |||
| Remote control(Optional) | Without obstacles≤800m | |||
| Temperature of coolant when warm blower is started | 45°c | |||
Car Parking Heater Package list
| Name | Specifications | Amount | |
| 1 | Parking heater | YJH-Q9/2C | 1 |
| 2 | Bolt | M8*16 | 3 |
| 3 | Spring washer | Φ8 | 3 |
| 4 | Bracket for the main equipment | 1 | |
| 5 | Muffler | XYQ-II | 1 |
| 6 | Fuel suction pipe | XYG-II Φ5*600 | 1 |
| 7 | Fuel oil pipe | Φ2* XYG-II ΦII5*8000 | 1 |
| 8 | Inlet air pipe | Φ38*/Φ33 L=900 | 1 |
| 9 | Exhaust pipe tube | Φ38/46 L=1000 | 1 |
| 10 | Water pipe tube | Φ19/ Φ28 L=2600 | 1 |
| 11 | Main wiring bundle | 1 | |
| 12 | Fuel filter | RYL-I | 1 |
| 13 | Fuel pipe joint tube | Φ4.1/Φ10.5 | 6 |
| 14 | Fuel pipe clip | 9-11 | 12 |
| 15 | Fuel pipe clip | 12-14 | 2 |
| 16 | Reducing tee | Φ5-Φ8/Φ8 | 1 |
| 17 | Fuel pump | YB-I-24V | 1 |
| 18 | Fuel pump clip | Φ32 | 1 |
| 19 | Drilling screw | ST5.5*25 | 1 |
| 20 | Inlet air pipe clip | 2 | |
| 21 | Drilling screw | ST5.5*25 | 2 |
| 22 | Inlet air pipe clip | 25-40 | 1 |
| 23 | Drilling screw | ST5.5*30 | 6 |
| 24 | Exhaust pipe fixing clip | 2 | |
| 25 | Drilling screw | ST5.5*25 | 2 |
| 26 | Exhaust pipe clip | Φ37-42 | 3 |
| 27 | Positive wire of power supply | 1 | |
| 28 | Fuse base | 1 | |
| 29 | Fuse | QY169-5A | 1 |
| 30 | Fuse | QY169-20A | 2 |
| 31 | Self tapping screw | ST4*16 | 2 |
| 32 | Fan relay wire | 1 | |
| 33 | Fan relay | 4141(24V) | 1 |
| 34 | Self tapping screw | ST4*16 | 1 |
| 35 | Washer | Φ4.5/Φ9 | 1 |
| 36 | Timer | MNB-III-24V | 1 |
| 37 | Plug | DJ7041A-2.8-21 | 1 |
| 38 | Self tapping screw | ST3*20 | 1 |
| 39 | Fuel pump connection wire | 1 | |
| 40 | Fuel pump connector | DJ7023-3.5-21 | 1 |
| 41 | Special water pipe joint | Φ20/Φ18 L=60 | 2 |
| 42 | Water pipe joint | Φ20 L=55 | 2 |
| 43 | Water pipe clip | 16-25 | 2 |
| 44 | Water pipe clip | 20-32 | 6 |
| 45 | Strapping tapes | 4*200 | 1 |
| 46 | Operation manual | 1 |
Car Parking Heater Introduction
The main equipment of environmental protective and highly intelligent remote control
car parking heater is a small fuel furnace controlled bya single-chip microprocessor. car
parking heaters medium circulation system is connected with the cooling system of
automobile engine. In such a way, the cooling liquid for engine can beheated by the car
parking heater while the engine is not working, so as to increase the temperature of the
engine and the interior of automobile. The engine is made easy to start even at very low
temperature and both the drivers and passengers can have a warmer environment.
Car Parking Heater Product Characteristics
Delivery terms can be customized.
Both as original and installation equipment.
Work at any time even in the low ambient temperature.
Eliminate idling and reduce fuel consumption.
Compact structure,easy install and maintain.
