Product Details:
Payment & Shipping Terms:
|
Name: | Parking Heater | Color: | Gray |
---|---|---|---|
Material: | Steel | Size: | 25*16*9cm |
Fuction: | Marine Heater | Key Word: | Diesel Heater |
High Light: | Diesel Cabin Heaters Marine,Portable Gas Heaters |
Marine diesel heater 5KW 12V liquid parking heater with water pump outside
1. Range of Application
The heater has the qualities of high thermal power and efficiency. It can apply for preheating the autos at a low temperature and eliminating the frost of the trucks, engineering autos and special vehicle.
2.Product Advantages
Preheating the engine and the car without staring engine.
Avoiding wear of the engine caused by start at low temperature.
Resolving the trouble of defrosting and snow scrapping.
Easy install based on small and smart structure, can be removed to a new car.
90% of fuel saved when the heater is started.
3. Technical Specification
Item | JP marine diesel heater |
Thermal Power | 5000 Watt |
Fuel | Diesel |
Rated voltage | 12V |
Fuel consumption(1/h) | 0..21-0.69 |
Rated power(W) | 10-37W |
Lowest working temperature (°C) | -40 |
Weight(KG) | 2.6 |
Size(mm) | 250mm*160mm*90mm |
4. Production
5. Working pricple
The cooling liquid of engine flows through water inlet pipe 19, the furnace cavity between the furnace inner casing 3 and outer casing 2, and water outlet pipe 18, forming a complete loop for the cooling liquid circulation system. The circulation is forced by water pump 13. In this way, the cooling liquid of engine can be heated again and again in the furnace and the temperature of engine, water-tank, heat-exchanger and cab can rise gradually.The car should be started first for circulating the coolant after installation.Switch the A/C to warm blower mode,the bubbles can be eliminated after the warm air blows.
1.Combustion supporting fan
2.Furnace outer casing
3.Furnace inner casing
4.Combustor
5.Glow plug
6.Flame sensor
7.Water temperature sensor
8.Overheat sensor
9.Controller
10.Air inlet pipe
11.Muffler
12.Fuel pipe connector
13.Water pump
14.Fuse
15.Main wire harness connector
16.Fuel pump
17.Exhasut pipe
18.Water outlet pipe
19.Water inlet pipe
20.Burner