Product Details:
Payment & Shipping Terms:
|
| Heating Medium: | Air | Fuel Consumption: | 0.11-0.51 |
|---|---|---|---|
| Place Of Origin: | Beijng, China(Mainland) | Start Up(watt)/amp Running (12/24 Volt): | <100 |
| Size: | 470*310*300 | Weight Kg(ibs): | Approx 4.5kg/9.9(ibs) |
| Rated Voltage: | 12/24V | Overheat Protection ℃/℉: | +35℃/95℉ |
| High Light: | marine cabin heater,Gas Caravan Heater |
||
Diesel Engine Block Air Parking Heater For Truck 4000w 24v
2 YEARS WARRANTY
JP China Trade Int'l Co., Ltd is a preffesional company supply for parking heaters. In UK and AU,there are specific SOLE agents work for us and sell our heaters for over 6 years.
We offer different air heaters and liquid/water heaters. There is no limitation on the model of vehicles.Retail and wholesale of our products, either is ok. Please feel free to contact.
| No. | Name | Specification | QTY | Order No. |
| 1 | Parking heater | FJH-2.2/1C ( ) | 1 | 4A200212C11 |
| FJH-2.2/2C ( ) | 4A200224C11 | |||
| FJH-3.0/1C ( ) | 4A200312C11 | |||
| FJH-3.0/2C ( ) | 4A200324C11 | |||
| FJH-4.0/1C ( ) | 4A200412C11 | |||
| FJH-4.0/1Q ( ) | 4A200412Q11 | |||
| FJH-4.0/2C ( ) | 4A200424C11 | |||
| 2 | Main wiring harness | 12V( ) | 1 | 12031000100 |
| 24V( ) | 12031000200 | |||
| 3 | Fuel pump | 12V( ) | 1 | 33000003100 |
| 12V with damper( ) | 33000007600 | |||
| 24V( ) | 33000003200 | |||
| 4 | Filter | Only diesel | 1 | 33000000400 |
| 5 | Fuel pipe(from pump to heater) | φ4/φ2 L=6800 | 1 | 12060004200 |
| 6 | Fuel pipe(from pump to fuel tank) | φ5/φ2 L=1200 | 1 | 31010602300 |
| 7 | Control switch | 1 | 31010700400 | |
| 8 | Protective gasket(control switch) | 1 | 12040600900 | |
| 9 | Air inlet pipe | φ29/φ25*600 | 1 | 31010202700 |
| 10 | Exhaust pipe | φ24*700 ( ) | 1 | 31010602500 |
| φ24*1000( ) | 31010202800 | |||
| 11 | Gasket | 81×110×6 | 1 | 12040600100 |
| 12 | Reducing T | 10-6-10 | 1 | 12020015700 |
| 13 | Reducing T | 12-6-12 | 1 | 12020015800 |
| 14 | Fuel pump clip | φ32 | 1 | 12010007100 |
| 15 | Exhaust pipe clip | 24-28 | 1 | 12010004400 |
| 16 | Air inlet pipe fixing clip | 2 | 29010003700 | |
| 17 | Exhaust pipe fixing clip | 2 | 29010002300 | |
| 18 | Fuel pipe connector | φ3.5/φ9.5 L=50 | 2 | 12060003900 |
| 19 | Fuel pipe connector | φ4.1/φ10.5 L=50 | 4 | 12060003800 |
After the heater is installed, in order to remove air trapped in the fuel supply system thoroughly and fill the fuel route with fuel only we Specially designed for oil pump function alone:In the
Ventilation mode, short connection external temperature sensor 2 times continuously,then the fuel pump (4hz) stop pump fuel after the third time.Only effective when each power on.
Trial operation is necessary for the heater before it is put into normal use. At trial operation, you have to check leakage from all connections and all safety issues. If discharge of dense smoke is observed or irregular combustion noise or fuel smell is sensed, the heater must be turned off.
Please take out the fuse, making the heater unable to operate. The heater can only be put into use after it is tested by qualified professionals.
Some smell maybe occurs in the first time using heater within a short time which is a common phenomenon and does not mean heater not working properly.
Before each heating season, check shall be performed by qualified professionals for
maintenance works, details as follows:
Check air inlet and air outlet to find any pollution or foreign matters.
Clean the external of the heater.
Check if there is any corrosion or loose connection for electric contacts.
Check to find any clogging and damage to the air inlet pipe and exhaust pipe.
Check to find any leakage on the fuel pipe.
The heat exchanger of the heater can not work for longer than 10 years. When it has worked for ten years, it must be replaced with a qualified one. The replace work must be performed by the heater manufacturer or its authorized agent. At this time, the overheating sensor shall be replaced too.
The exhaust pipe of the heater for discharge of waste gas after combustion, if arranged in an area with passengers, shall be replaced with qualified one when it has worked for 10 years.
The ambient temperature shall be in the range of -40℃~85℃ for transport and storage of the heater to avoid any damage to its Only authorized customer service stations are allowed to provide repair and installation for the heater. It is prohibited to make repair by yourself or use non-manufacturer’s parts or components so as to avoid danger.
